A number of foliar diseases can impact corn production in both Indiana and Michigan. They included gray leaf spot, northern corn leaf blight, southern rust and now tar spot. Environmental conditions, particularly moisture, during the growing season will play a big role in the risk of foliar disease development in a field. Irrigation can confound this. Therefore we want to review some of the factors you should consider when making disease management decisions. These include understanding the disease triangle, water management and leaf wetness influence on foliar disease, factors to consider when to apply a fungicide, and finally a review of what we’ve learned so far on how to best manage tar spot.
Disease triangle
There are three parts to the disease triangle which influence the amount of disease that will develop in a crop canopy. These include the presence of a 1) virulent pathogen, 2) susceptible host, and 3) favorable environmental conditions (Fig 1 a). Each plant disease has its own set of individualized factors that contribute to the disease triangle and determine the risk and impact on yield. For example, tar spot of corn – the pathogen, Phyllachora maydis, may either overwinter on diseased tissue (pathogen is present in a field) or move with weather systems. Figure 1 gives an example of how if the pathogen, host or environment factor becomes unfavorable then the amount of disease that will develop is decreased. Factors such as reduced initial inoculum (Fig1-B), host resistance (Fig1-C) or lack of leaf moisture (environment) (Fig 1-D) all can lead to the decreased risk of foliar diseases. And if one or more factors are combined risk can further be decreased (Fig 1-E).
Water management and leaf wetness
Leaf wetness is a major driver of disease development. Fungal diseases require moisture to produce spores and to infect the plant. Differences between years in rainfall patterns often drive disease onset and severity. For example, most of the great lakes region saw regular rainfall during the 2018 growing season this resulted in early onset of tar spot and a significant epidemic. Compare that with 2019, which saw a much slower onset and build up of tar spot, due in large part to the dry late July and August that was experienced in the region. Irrigation obviously provides additional leaf wetness events that can drive diseases including tar spot. In 2018, we had multiple accounts of irrigation contributing to disease development and driving 50bu/A yield losses, as compared to non-irrigated sections. Conversely we had an interesting example in 2019, where it was clear that irrigation was driving tar spot disease, however due to the much drier growing season, irrigation was necessary to maximize yield potential. In addition, we have several anecdotes of frequent light irrigation events driving tar spot development. Producers should try to minimize leaf wetness by avoiding frequent light irrigation and watering appropriately. Work is also currently being conducted to examine the impact of the timing of irrigation and how this might be manipulated to minimize leaf wetness. For example to maximize disease pressure in our fungicide disease screening trials, we may irrigate in the early evening hours to try and promote a prolonged leaf wetness throughout the night.
Decision making for applying a fungicide
Fungicides are a great tool to have in your disease management toolbox. They can be effective at reducing disease and protecting yield, but there are a number of factors that should be considered before pulling the trigger.
- Disease risk in the field – is there a history of a particular disease causing a problem? What was the previous crop?
- Current disease activity – while scouting is the disease active in the lower canopy, is there indications that the disease is spreading (ex. southern rust tracking map https://corn.ipmpipe.org/southerncornrust/)
- Weather conditions – will there be favorable environmental conditions for the disease to continue to develop? Is there a lot of rain and moisture to encourage many of our foliar diseases? Are there tools that can help predict risk?
- Return on investment – will the yield protected by a fungicide cover additional costs of the application?
Okay you’ve made the decision that you want to apply a fungicide – now what?
The Corn Disease Working Group has developed ratings for how well fungicides control major diseases of corn in the United States. This table is annually updated based on field testing of products. We pulled some of the information for reference in Table 1. The full document is found in the resources section on the Crop Protection Network website (https://cropprotectionnetwork.org/resources/publications)
We highly recommend leaving check strips to determine your ROI from fungicide applications, the results might be surprising.
Managing tar spot
Tar spot is a disease of corn previously reported in Central and Latin America. In 2015 tar spot was found for the first time in the US, in the states of Indiana and Illinois. Since then a significant epidemic was observed in 2018, with continued spread in 2019, the disease has now been confirmed in nine states including Florida.
As the name suggests the disease appears and feels like flecks of black tar on the leaves, which cannot be rubbed off the leaf. These small (1/16”) black spots are the fungal fruiting structure, which are capable of releasing spores to infect new corn plants. The fungus Phyllachora maydis is the only pathogen associated with this disease that has been confirmed in the US. In Mexico, an additional fungal species is suspected of causing fish-eye symptoms, which is seen as dead leaf material around the black spots. We see the fish-eye symptoms in the US, however, to date, we have not found any secondary species associated with these symptoms. In fields with severe disease the corn will often appear frosted, will senesce early and may lodge. Aside from the impact on grain yield and test weight we have also observed the impact of this disease on silage quality. When severe the disease results in corn that is too dry for silage production, and it reduces silage quality by reducing the digestible component and energy value of the feed. Thankfully, there are no associated mycotoxins with this disease. A challenging aspect of tar spot is the rapid progression of disease. In some fields the first signs of disease were observed in early July, with widespread symptoms at the start of August that led to complete senescence at the field level by early September.
As with the management of any disease, the selection of hybrids with good disease resistance packages is essential. However, as tar spot is so new to North America none of our material has previously been screened and bred for this disease. An assessment was made on the impact of tar spot on corn hybrids which can be found here: https://cropprotectionnetwork.org/resources/features/how-tar-spot-of-corn-impacted-hybrid-yields-during-the-2018-midwest-epidemic. It was found that no hybrids were immune; however, there were differences with some hybrids being more resistant than others. With every 10% increase in tar spot severity we noted a 5 bu/A yield loss. Additional screening of hybrids and inbreds will be necessary to identify and incorporate sources of resistance into available hybrid varieties. It is recommended that farmers talk to their seed salespeople for any updates. With little information it would be best to spread risk by planting a few different hybrids. Planting corn on corn may increase the risk of developing tar spot, however even fields under a soybean-corn rotation have been significantly impacted, most likely as the spores are readily dispersed on the wind and capable of moving some significant distance.
Although fungicides help in managing tar spot do not expect 100% control. Fungicide timing is critical for maximizing tar spot disease management. At this point we will have to see what weather conditions and disease pressure is like in 2020. The pathogen is capable of overwintering on infested residue, so in areas where the disease is becoming established there will be a greater availability of disease inoculum to initiate disease. Scouting fields will be essential to stay ahead of this disease. In some situations, it may make economic sense to make two fungicide applications, or possibly hold that VT/R1 application to slightly later in the season. We are working with collaborators to develop fungicide spray forecasting models.
In order to track tar spot this coming season we would like to hear from you. Especially if you observe tar spot in counties that have not been confirmed to date, please send a picture of diseased leaves to us directly at email: chilvers@msu.edu, dtelenko@purdue.edu or Twitter: @MartinChilvers1, @DTelenko
For more information on tar spot and other diseases see www.cropprotectionetwork.org